Jetway-computer NF77 Manuel d'utilisateur télécharger pdf (Page 31)

Secondary Master/Slave UDMA

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the

operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus

master driver). If your hard drive and your system software both support Ultra DMA133,

select Auto to enable BIOS support. The settings are: Auto, Disabled.

IDE DMA Transfer Access

The integrated peripheral controller contains an IDE interface with support for one IDE

channels. Select Enabled to activate each channel separately. The settings are: Enabled and

Disabled.

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sector read/write.

If your IDE hard drive supports block mode (most new drives do), select Enabled for

automatic detection of the optimal number of block read/writes per sector the drive can

support. The settings are: Enabled, Disabled.

SATA Function

This item allows you to control Serial ATA controller by setting it as Enabled or Disabled.

SATA/RAID Mold

The optional settings are IDE; RAID.

3-7-2 Onboard Device Function

Phoenix – AwardBIOS CMOS Setup Utility

Onboard Device Function

Item Help

Onboard HD Audio Device Auto

Realtek Lan1 Device Enabled

Realtek Lan1 Bootrom Disabled

Menu Level >>

↑↓→←

Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Onboard HD Audio Device

This item allows you to decide to enable/disable the chipset family to support HD Audio.

The settings are: Enabled, Disabled.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Pas de commentaire

Jetway-computer NF77 Manuel d'utilisateur Page 31